Tools for the bottom bracket area of a bicycle
Reassembled in the end. Couldn't check the bottom bracket, but the cause of the noise is likely the square taper at the base of the crank. I'll check it out tomorrow.
Just bought a bottom bracket remover
Removed the right side too. It was quite loose. Dangerous.
It's out. This is the noise. If I grease it and reassemble, it should go away, probably.
Pulling it out
Crank remover
There is a strange noise coming from the bottom bracket area, so I'm going to take a look. First, remove the cap with an 8mm Allen wrench.
Comments